SSF-K5 series standard injection molding machine
Products > SSF-K5 series standard injection molding machine

150T Fixed pump plastic injection machine(SSF1500-K5)

SSF-K5 series standard injection molding machine

150T Fixed pump plastic injection machine(SSF1500-K5)
  • Parameters
  • Description
  • Accessories
  • Application

SSF1500-K5 Parameters 

Items

Parameter

Unit

SSF1500-K5

Injection Unit

Screw diameter

mm

A

B

C

38

42

45

Screw L/D ratio

L/D

23.7

21.4

20

Shot volume(theoretical)

Cm3

226

277

318

Injection weight(PS)

g

206

252

289

Oz

7.3

8.9

10.2

Plasticizing Capacity

g/s

16

22

28

Injection rate

g/s

106

130

149

Injection pressure

Mpa

223

183

159

Screw speed

rpm

220

Clamping unit

Clamp force

KN

1500

Open stroke

mm

400

Distance between tie bars (W*H)

mm

430*430

Max mould thickness

mm

480

Min mould thickness

mm

160

Ejector stroke

mm

130

Ejector force

KN

45

Ejector number

PC

5

Dia of mould location hole

mm

125

Others

Max pump pressure

Mpa

16

Pump motor power

KW

13

Heating power

KW

10.3

Machine dimension(L*W*H)

m

4.5*1.35*1.9

Machine weight

T

4

Oil tank capacity

L

250

 

Notes:(1)Theoretical injection volume=screw diameter×screw stroke;
         (2)Actual injection weight is 91% of the theoretical volume;
         (3)All the data is PS values.

Remark:Above-mentioned technical parameters are all theoretical values in 50HZ operation state. The technical parameters are subject to change for technical improvement without notice.

Mold platen drawing

 

SSF1500-K5 injection molding machines, with energy saving features, applies to the injection molding process of various kinds of thermoplastics.

 

Advantages of servo motor

1. There is no extra energy consumption due to output volume changes according to load alteration. In the phase of holding pressure, servo motor lowers rotate speed and consumes a little of energies. In the phase of cooling, motor doesn’t work and consumes no energy. According to different products, servo energy saving injection molding machines will save 20%~80% energy and bring you prominent economic benefit.

2. High precision, high response: The pressure sensor and rotary encoder with high precision and high sensitivity achieve pressure, flow closed-loop control, allowing the repeat precision error to be less than 1%. It only takes 0.05 second to reach the largest output power.

3. Save the cooling water: No constant flow pump and speed set motor overflow heating. When the temperature of hydraulic oil is lower, the cooling water is greatly reduced.

4. Super energy saving: Compared with variable pump system, it can save 40% of the power. Compared with constant flow pump and fixed speed motor. It can save 60% of the power.(Different kinds of products have different energy saving effects.

5. Low noise: The noise is below 78db. Servo motor has almost no noise when no movement of machine.

Standard features

Double-cylinder balanced injection system

Multi-stage pressure & speed injection

Back pressure adjustment device

Low pressure mold protection

Double hydraulic core pulling valve block

Multiple hydraulic ejector knock-out

Mechanical, Electrical safety device

Auto lubrication system

Hydraulic pressure full proportional control

All computer control system

Mold data memory system (Can save 199 set molds data)

T-slot mold platen

 

Standard components

Mechanical leveling pad

Extended nozzle

Spare parts (O-rings)

Tool box

Lubrication grease

    

Optional functions & Auxiliaries

Double air blast valve

Double core pulling valve

Water regulation meter

Ceramic heaters

Water flow regulator

Three color alarming light

Euromap 12,67 robot interface

Oil bypass filter

Back pressure valve controller by computer

Hydraulic safety device

 

Robot

Hopper dryer

Auto loader

Hopper magnet

Mold clamps

Chiller

Plastic dehumidifier

Mold temperature controller

Oil temperature controller

Hardware industry plastic parts, electronic cover, glasses frame, packing products like PET performs, caps and daily used commodity, Stationery, PVC pipe fitting, Agriculture irrigation, Automobile parts.

Hot keywords:high quality
Leave Messages Please feel free to contact us, your inquiry will reply within 24 hours.
Related Articles:
Products
Top
Product Catalog
Products