Matters Needing Attention When Using Hydraulic Injection Molding Machine

1. The user should understand the working principle of the hydraulic system, be familiar with various operations and adjust the position and rotation of the handle, etc.
2. Before working, check whether the adjustment handles and handwheels on the system have been moved by irrelevant persons, whether the positions of the electrical switches and stroke switches are normal, whether the installation of the tools on the host is correct and firm, etc., and then expose the guide rails and piston rods Partially wipe, and then start.
3. The hydraulic oil should be checked and replaced regularly. For the newly-used hydraulic equipment, the oil tank should be cleaned and replaced with new oil after about 3 months of use. After that, it will be cleaned and oil changed every six months to one year.
4. The system with exhaust device should be exhausted, and the system without exhaust device should be reciprocated many times to let it naturally discharge gas.
5. Coarse and fine filters should be configured in the system as needed, and the filters should be checked, cleaned, and replaced frequently.
6. The flow control valve should be adjusted from small flow to large flow and should be adjusted gradually. The flow control valve of the synchronous motion actuator should be adjusted at the same time to ensure the stability of the movement.

Customize Your Hydraulic Injection Molding Machine

No matter what kind of  hydraulic injection machine  you are looking for, we can customize the molding machine for you according to your project needs. As a well-known injection molding machine brand in China , ss machinery can provide you with the injection molding machine you need.

You are welcome to consult relevant product information, we will give reasonable pricing and solutions.

Consult Immediately