Shuangsheng is the top injection molding machine manufacturer in China. It has been providing manufacturing and customized injection molding machine services to customers worldwide. The clamping force of the injection molding machine provided by our servo system ranges from 32T to 410T.

Features of Our Servo Injection Molding Machine

❖Double cylinder balanced injection system;

❖Adjustable injection capacity from 0 to 692 gram for nylon resin, HDPE, LDPE,polystrol;
❖ Multi-stage pressure &speed injection;
❖ Back pressure adjustment device;
❖ Low-pressure mould protection;
❖ Single hydraulic core pulling and inserting;
❖ Screw diameter is in accordance to the injection capacity;
❖ Multiple hydraulic ejector knock-out;
❖ Mechanical, electrical safety device;
❖ Cooling System for hydraulic oil consists automatic system with flow regulator;
❖ Hydraulic pressure full proportional control;
❖ Computer control system;
❖ Molding data memory system;

❖Automatic mould adjust function;
❖ Compatible Autoloader and Hopper dryer for mentioned injection capacity;
❖ Nozzle heater is provided for heating power adjustment.

Parameters of SSF2700-S Servo Injection Molding Machine

Items	Parameter	Unit	SSF2700-S
Injection Unit	Screw diameter	mm	60
	Screw L/D ratio	L/D	21
	Shot volume(theoretical)	Cm3	760
	Injection weight(PS)	g	692
	Injection weight(PS)	OZ	24.4
	Plasticizing Capacity	g/s	52
	Injection rate	Cm3/s	308
	Injection pressure	Mpa	162
	Screw speed	rpm	180
Clamping unit	Clamp force	KN	2700
	Open stroke	mm	553
	Distance between tie bars (W*H)	mm	580*580
	Max mould thickness	mm	580
	Min mould thickness	mm	220
	Ejector stroke	mm	150
	Ejector force	KN	70
	Ejector number	PC	9
	Dia of mould location hole	mm	160
Others	Max pump pressure	Mpa	16
	Servo motor power	KW	31.4
	Heating power	KW	20
	Machine dimension(LWH)	m	5.9X1.6X2.2
	Machine weight	T	7.7
	Oil tank capacity	L	360
	Input voltage	V	380-420
	No. Of phases		3Phase,4Wire
	Machine Structure		Horizontal
	Frequency	Hz	50

Notes:

(1)Theoretical injection volume=screw diameter×screw stroke;
(2)Actual injection weight is 91% of the theoretical volume;
(3)All the data is PS values.
Remark: Above-mentioned technical parameters are all theoretical values in 50HZ operation state. The technical parameters are subject to change for technical improvement without notice.

Mold Platen Drawing

Parts That Can Be Produced

Customized injection molding machine solutions for you now

SSF2700-S injection molding machines applies to the injection molding process of various kinds of thermoplastics. Clamp force is 270T.

Advantages of servo motor

1.There is no extra energy consumption due to output volume changes according to load alteration. In the phase of holding pressure, servo motor lowers rotate speed and consumes a little of energies. In the phase of cooling, motor doesn’t work and consumes no energy. According to different products, servo energy saving injection molding machines will save 20%~80% energy and bring you prominent economic benefit.

2.High precision, high response: The pressure sensor and rotary encoder with high precision and high sensitivity achieve pressure, flow closed-loop control, allowing the repeat precision error to be less than 1%. It only takes 0.05 second to reach the largest output power.

3.Save the cooling water: No constant flow pump and speed set motor overflow heating. When the temperature of hydraulic oil is lower, the cooling water is greatly reduced.

4.Super energy saving: Compared with variable pump system, it can save 40% of the power. Compared with constant flow pump and fixed speed motor. It can save 60% of the power.(Different kinds of products have different energy saving effects.

5.Low noise: The noise is below 78db. Servo motor has almost no noise when no movement of machine.

Share your thoughts with us today! Showing 6 of 0 reviews

Most recent

Top Reviews

Your rating

Your review *

Name *

Enter your Name

Email *

Enter your Email

Upload Image

Notice: Ensure your image is no larger than 200KB before uploading.